Hydraulic Systems

 GRiPSHORE Trench Box

  • Two sided lightweight Trench Box that utilises the hydraulic bracing system that is quick and easy to assemble
  • Due to the system being lightweight it can be installed by hand or a small excavator
  • Designed for use as a temporary support for small trenches
  • System inside widths between 550 – 1375mm
  • Suitable for depths up to 1.5m
  • Safe Working Load is 16.5kN/ m²
Description Weight (kg) Inside width between rails (mm)
(see Below)
Clearance Under Lowest Jack (mm) Clearance Between Jacks (mm) Safe Working Load Moment Capacity (kN/m²)
1.5m x 1.5m GRP Trench Box Panel 27.3 550 – 1375 570 600 16.5
Description Weight (kg) Range (mm) Axial Safe Working Load (kN)
Type A Jack 5.7 550 – 900 60
Type B Jack 8 850 - 1375 30

Follow Us on Facebook


  • Coming Soon!

    Big news - 6m long slide rail panels are on there way to NZ.


  • Did you know that there are regulations that apply to excavations over 1.5m deep
    Are you at risk of breaching them?

    We can help!