Slide Rail Systems

Double Slide Rail

  • This system is used for larger and deeper excavations for large diameter or very deep pipelines or major culverts
  • Suitable for trenches up to 6000mm deep
  • The system consists of 6000mm ails, transverse frames and panels. Panels are available in 2000mm, 3000mm and 4000mm lengths
  • Transverse Frames are able to move up or down within the Slide Rail tracks to achieve the desired clearance, up to 3300mm
  • Inside width up to a maximum of 7400mm (or greater with special strengthening)
  • Limit State Loads range from 71kN/m² to 171.6kN/m²

  • Base Panels incorporate a cutting edge to improve ‘Dig and Push’ installation method
  • Recommended for hydraulic excavators from 25 tonnes to 45 tonnes for ease of installation
Description Weight
(kg)
Thickness
(mm)
Module Length
(mm)
Clearance Between Transverse Beams (mm)  Limit State Design
Load (kN/m²)
KR 2000 x 2400 509 100 2662 2102 171.6
KR 3000 x 2400 692 100 3582 3022 81.1
KR 4000 x 2400 1165 120 4662 4102 71.0
KR 2000 x 1300 336 100 2662 2102 171.6
KR 3000 x 1300 452 100 3582 3022 81.1
KR 4000 x 1300 744 120 4662 4102 71.0

Follow Us on Facebook

News

  • New "Multibox" is available now

    TSNZ launches a new slide rail manhole box variant. Available in NZ now, the new Multibox...

Updates

  • Did you know that there are regulations that apply to excavations over 1.5m deep
    Are you at risk of breaching them?

    We can help!